G'day All,
Just wondering if there is a preferred type of varnish to use on a bare neck, i.e no fret board. Something that wont peel off or wear to quickly. I notice the neck of the cbg I built late last year is getting grubby. Not that my fingers are dirty as such, but just general use staining. You can actually see the clean lines where the strings are! (It looks much worse in real life.)
I have an electric guitar with a varnished neck (no fret board) & I would like to do this to future cbgs.
Any advice would be muchly appreciated !
Tags:
The fretboard and rest of neck on pro instruments are usually finished differently. I currently use a polyurethane for the back of the neck and organoil brand hard burnishing oil on the fingerboard. Danish oil or similar finishes have also been widely used. I did the tour of the Kamaka ukulele factory and they used Whatco Danish oil.
You're correct Mr. Titch. Backs and fretboards should be finished differently for best results. The majority of fretboards are rosewood, followed by ebony and maple. Fender finishes maple fretboards with a gloss finish that stands up over time. I don't know what it is. Poly, lacquer, or equivalent finishes will not stand up. The strings will wear through them quickly leaving a mess that is difficult to repair.
Oil finishes that penetrate are a good choice. They don't work well on maple however, because of its density.
Back of the neck, anything works.
I use D'Addario Hydrate. It darkens and hydrates raw wood. It requires reapplication at string changes. Works well.
Just my observations.
Thanks for the input fellas, all appreciated! I'm recon I'll give the polyurethane a go on the front of the neck (no actual fretboard) & regular varnish on the back of the neck & body. Here's a pic of an old electric of mine with no fret board, the frets are quite worn but the coating between the frets isn't even scratched. My cbgs don't get thrashed too much so I'll see how it goes.
Tru-oil...cheap n' easy!
G'day Beetlejuice!, I didn't know if oil would prevent a stained fret board, so that's why I'm going with the polyurethane, but I'm going to look into this Tru-oil though.
I once heard someone on this site call out polyurethane as plastic. And never put plastic on something you love. I prefer tung oil, it leaves a great finish on a guitar neck.
Each to their own I guess, but if it does what I want it to do, then I'm happy to use it. I will check out Tung oil though. I just used linseed oil on a neck this morning (it's all I had...), looks & feels good so I guess time will tell!
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray May 7. 11 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans May 5. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!