Hi everyone,
I recently built my first proper CBG, using a neck-on-top design. I'm hoping to add a magnetic pickup, and I'll probably either buy a Flatpup (http://www.original-flatpup.com/flatpup-cbg-pickup/86-fp3-scalloped) or build my own (http://onestringmusic.blogspot.com/2013/03/winding-1-string-humbuck...). My concern is that, even though these pickups are pretty flat, I might still have to cut a small notch in the neck in order to prevent the strings from touching the pickup. It wouldn't need to be very deep (the production model is advertised as being 4mm thick, and the homemade version doesn't look much thicker), but I'm still a little concerned that cutting a notch might weaken the neck a bit. The neck is made from 1x2 hardwood (I think it's oak, but I'm not sure).
What do you guys think?
Tags:
Oh wow, that's wild! My knowledge of electronics is pretty limited, but I might be able to figure it out. At the very least, I could probably figure out a way to suspend a flatpup-type thing above the strings. It'd be ugly and kludgy, but there's definitely a certain appeal in that. Thanks!
That's quite a design! Based on this photo, it looks like there's a small cutout that the pickup fits into, and another piece of wood attached to the back of the neck, I'm guessing for reinforcement. Am I correct about that?
Hey, that sounds great! I watched your other video as well. I like how you have two different volume knobs for the two pickups.
Hey Mark, I read your post earlier today, and followed the link for the diy flat pickup. I was able to make one with stuff I had. The thing works good! I'm going to post a picture. Thanks for putting that link in your post.
Glad to hear it works well. It seems remarkably simple. I tried making one, and it didn't work, but I think I may have used wire that was too thick. I only got about 200 turns before it got too beefy, and I'm guessing that wasn't enough. Also, how did you go about mounting it to the guitar?
I forgot to mention that I had proper 42ga wire from StewMac left over from 10 years ago, when I made a few pickups. I just soldered it to a jack and held it next to a git to test it. I think when I mount it, I will cut a whole in the box but won't need to notch the neck. Although, I have the neck braced anyway. The times I thought I didn't need to double the neck inside the box, I regretted it later. They sound funny when the neck isn't strong enough.
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray May 7. 11 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans May 5. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!