Hi Folks
I am looking to get a new bandsaw as the one I use is rubbish to be honest. Doesnt even cut in a straight line anymore.
I use it to cut basic slots in the neck for allowing the cigar box lid to sit nicely and also for the headstock. I would like to be able to cut more than just straight lines though and round off parts of the headstock or tale piece etc.
Can anyone recommend what they use or recommend a specific bandsaw?
Is there any other electric tools that people would use to make life a little easier? I have been thinking on getting a router - have never used one before but people seem to find them quite useful.
Cheers Gafferino
Tags:
Check out grizzly tools, they haver a nice 14" bandsaw I would like. I use an old craftsman 12" saw now and it works fine too.
The Inch measurement for a bandsaw refers to the distance between the blade and the main beam that supports the upper arm. Or put another way, the theoretical limit of the cutting piece in a radius such as a circle or disc.
The UK used to make some really nice wood working equipment. The Germans make nice production stuff. There were a couple of Italian manufacturers making production stuff. Might be out of business at this point. Most of what you will find is Chinese made. A lot of it from the same plants. Delta, Grizzly and such. Even looks the same. The differences are in who supports and what improvements in quality the brand insists from the plant making the machines.
I have no idea as to what brand in your neck of the globe but perhaps you can look at what is available on the UK Amazon site.
The inch measurement Michael was referring to is the "throat depth" of the saw. Basically, it's the measurement between the inside edge of the blade and the inside of the upper wheel support. In the pic below, that measurement is 39.4cm
A lot of things can effect the blade not cutting a straight line, most of which are adjustable. Check the blade guide blocks on your saw to see that they're adjusted properly, and that the correct gap is between them. Guide blocks do wear rather quickly, so they probably need adjusting. Also know that how high you set your upper blade support assembly will effect the blade tracking straight or not.
You might not need to get a new saw at all. If you've had it longer than a year, or if you know that it hasn't been tuned up in a year or less, then that's most likely the problem with it. A Google search for "Bandsaw Tune Up" will give you several good results. Here are 2 that I use - 1 is a web page and the other is a PDF document.
http://www.woodcraft.com/Articles/Articles.aspx?articleid=223
http://www.woodsmithshop.com/download/105/105-bandsawtuneup.pdf
I've discovered over the years that keeping tools cleaned and tuned up will not only make them perform a lot better, it extends the life of them many-fold. I've taken tools that others were going to throw away and, with a little cleaning and maintenance, use several of them today.
I think if your saw cut well and straight at one time all it now need is a new blade and the guides adjusted. But the brand I like is Jet and Grizzely for a replacement saw. But even these will need to be adjusted from time to time.
If you are in Ireland, then chances are you might be able to get a Record. I bought a secondhand Record BS300 off eBay and it does me fine. It's got a 12" throat, cast iron table, a decent fence, came with a stand and it's pretty heavy (about 80kg). There are plenty of other decent brands as well. I started with a small budget, but soon realised there was no point buying new in my price range, as they were really just toys, so I upped my budget and decided to buy used. The Record is a the upper end of 'enthusiast' machines, and you start getting closer to industrial standard of features and quality than the cheaper machines.
Avoid the bench-top models as they probably won't have enough 'oomph', and steer well clear of any of the DIY chain stores. If you can afford it, buy something a bit bigger than you think you'll need - you won't regret it. Don't be fooled by that thickness timber they say the machine will cope with - you may physically be able to get a piece of 6" thick timber under it, but don't bet on the machine coping with it. Mine is fine with 3" thick oak, so thats about the toughest task it has to do.
By the way - as for cutting straight lines- bandsaws need setting up properly - a good new blade, properly adjusted blade tension, tracking and blade guides can make a difference.
Thanks for the replies folks. I initially bought it second hand very cheap as I wasnt sure what I required. It has never really cut straight to be honest (I have tried tuning it up) and generally struggles to cope with the wood. It is a 'desktop' bandsaw. Think I need to move up a slight bit. Thanks for the suggestions.
Also get a new set of tires and guides for it and it will be like new.
A new blade can really help...going round and round in a loop they tend to wear asymmetrically... they can get blunt on one side more than t'other and will develop a tendency to pull or wander. You only need to have nicked a nail, stalled the blade a few times during cutting or cut some really tough stuff to knacker the blade. A new blade and an hour's setting up transformed my saw. Mind you..if it's a cheap little POS don't expect much from it..probably OK for cutting scratchplates?
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray May 7. 11 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans May 5. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!