So I'm a bit confused about the break angle of the strings over the saddle. I'm sure like most things it will be a trade off. I thought that having a sharp or steep angle where the strings meet the saddle would give the best transfer of string vibration to the bridge and top and provide maximum volume/tone. It would also eliminate buzzing or sliding of the strings on the saddle. But, my best sounding CBG and my commercially made resonator guitar both have a very shallow break angle over the saddle and they both are very loud and clear (CBG is not a resonator but does have a nice Punch Chateau box) I see many builds here that have very shallow break angles but are said to sound good as well.
What do you folks think about break angle at the saddle, steep, shallow, does it really matter?
I'm talking about acoustic guitars, not electric.
Thanks for your input!
Tags:
Well my immediate response would be the obvious answer. There is a balance somewhere that varies with and can either compliment or detract from other variables, generally including basic design and materials used.
In general, too much string pressure may mute a tops response just as too little might fail to harness its potential. I see some I would be sure had too little, yet sound quite good, and some designs I would suspect have far too much.
Therefore I dont think there is any set answer. The limitations set by box size on most of these designs should be a major limiting factor on acoustic response, yet on a regular basis people to prove me wrong.
My own acoustic efforts at this time are along the line of what I would describe as light, minimally braced and thin materials, but its all experimental, and again, it would appear that some people seem to consistently prove this approuch to be not necessarily on target. I tried a thin hardwood top that sounded harsh in my opinion, and now (when I get time to get back to it) am trying something in the other direction. And I am currently distracted from the acoustic thinking by some very electric ideas........
Ah what the heck, half the time the experiment is as great a pleasure as the result anyway.
Great advice from you both and thanks for taking the time to respond. I guess it is all part of the formula that combines to give whatever end result you come up with. Rather than spend all that time trying compile data, I think I'll just go build and see what happens!
I've changed my mind anyway mid -build as I often do and have just built a trapeze type tailpiece for it and ditched the bridge pin idea on this one, for now anyway!
Thanks again.
Bluesheart
" I think I'll just go build and see what happens!"
That is what it is all about anyway. I have only built 6 CBG so far, well 3 since 3 were from cookie, Snickers and MilkBone cans. As to the break angle I agree with the above posters. I think enough break to keep the strings from buzzing is all you need (low teens).
I really do appreciate all of the insightful answers and the time and effort spent thinking about these things. Just one of the things I love about being part of this community.
Thank you all, Bluesheart
For what it's worth, some actual figures. 4 mm clearance at the 17th fret, 13~14mm height at the bridge, with maybe 2 degree of neck relief. That gives you a good break (but not too much) over the bridge and enough clearance over the body so you don't hit it when strumming (sounds bad with piezos) and an action that means you have to be pretty good but not factory good on your fret levelling. At the nut end, 0.5 mm clearance on the first fret so your low notes play in tune.
Im not too sure that the angle can be too great. I understand what you're talking about Mr Bliss, and i cant fault your logic, but when I think about Les Jr type wraparound jobbies or string thru examples where the strings drop stright thru the body immediately behind a bridge, im not convinced it can be too great.
Similarly if we look at renaissance period stringed instruments and particularly the lute family theres some badarse angles in some heads happening back then. Now im sure those extreme angle heads are not structurally as strong as they could be on a lesser angle, but in terms of tone or sustain im not convinced you can overdo the angles.
I certainly agree you can underdo em..
i do my best to make the most of these angles, pitching the neck for a taller bridge, slotting or scarfing heads etc. angles are sexy
I also respect your input, but to clarify, I assumed we were talking about a typical bridge on top, strings over to a tail block or tailpiece. And the question pertained to the relationship of neck set, bridge height and pressure in the top.
The bridge designs you mention (Les Paul, common early Fender) are electric guitar designs, not acoustic-although there certainly are similar bridge designs on acoustics, generally where "tension" bridge arrangements are used, I made a generalization based on the assumption that we were not talking about those, but instead a typical "pressure" bridge arrangement.
As you said though, a lack of tension at the bridge will certainly be obvious, where the theory of too much tension may be less so....... And there are so many related factors that work together........
Hey its just a theory anyway! And seeing your builds I am open to any ideas you have to share!
One of my recent attempts has about a 3 deg set to the neck, about a 5/8" tall bridge and strings thru the tail. You would think this would have quite a bit of tension at a typical scale length and tuning, but in part because of the length of the string tail, I was a little surprised to find the strings want to wander around on the bridge more than expected when playing, so I need to rebuild or modify it to include some bridge notching, which I was hoping wouldnt be needed on this one. Just an experiment!
Have fun, and thanks for the input!
Mark
yeah mate all good :) im a fan o urs too .. by tension bridge do you mean one which the tension wants to rip off the soundboard like a flattop accoustic with pins rather than one which the tension wants to push thru the soundboard like mostly is done around here, with a sep tailpiece??
I am very interested in the differences between these two approaches.
experimenting is GREAT! again, im a fan
Heya, PK!
What angle ranges do you favor at head and at box? I have "eyeballed" to around 6 degrees at the head scarf. I am thinking about scarfing my first box-to-neck. After reading your comment, I'm wondering if 6 degrees is about right or maybe a waste of effort! Maybe I should set my box-to-neck sights on 15 degrees or nothing!
ALSO... though I see the head and box angles affecting each other, I don't see making a big deal out of maintaining symmetry or assigning an arbitrary calculation. Just a general range and go... yes?
Interesting topic and replies. Some of us on the nation can engineer and create precise angles. Most of us keep it simple. I have tried for break angles and they made things a bit complex for my mediocre skills. And I could not really notice an improvement in sound.
I think key things for acoustic sound are thin top, box size - bigger is usually better, having the neck not touch the top in the saddle area, not having the saddle too close to the end of the box and getting the string action up above the box - not too shallow - (raise the fretboard above the box....)
And then there are sound holes.. Or maybe there are not sound holes.... Is getting the right size, and placement of sound holes a science? Or an art?
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray May 7. 11 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans May 5. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!