This will probably be one of the weirder first time posts. I coach a middle school science team, and this year there is a new event that challenges the kid to build a home made instrument that can accurately play a scale, and a simple tune, then tests them over the physics of instruments.
According to the rules the device may not contain any of the following "Electrical or electronic components, parts taken from or used in any toy or professional instrument. The only exception is strings.
So so after some quick googling at our first team meeting we stumbled across cigar box guitars and thought this is perfect. So how do I substitute for parts? I think we can make tuners by drilling a hole in a bolt. is there anything special about fret wire that I couldn't substitute some other wire for it? about what size should I be looking at.
We are probably going to build 2. One will be a 1 string, and the other a more typical 3 string. Would there be drawbacks to not doing all the frets, and just doing the ones we need for the scale and 4 measures of yankee doodle?
These will be built by the kids, but when they are done I'm going to make one for me. Thanks for the help.
Tags:
hi, you could get away with not using frets at all. Just scribe and/or burn the positions into the fretboard.
TaffCheck this out, super simple cbg, gives all info & measurements? Good luck :)
https://cigarboxnation.com/forum/topics/easy-to-build-cigar-box-gui...
You could also use a sharpie or paint pen to mark the frets, maybe the easiest? You can also glue nails, wire or even wood frets on it, just measure the height of the frets off your favorite guitar if you’re not sure?
Tuners could also be wooden friction pegs like some student violins or fiddles.
I have seen small diameter nails used for frets. Or play fretless, as mentioned, by pressing where the frets would be.
This might help. They do use commercial guitar tuners. They also do a scarf joint for the headstock, which (IMHO) is a bit overboard.
https://buildingtoteach.com/wp-content/uploads/2017/02/Cigar-Box-Gu...
You could also go fretless and use a slide. Mark fret location with a sharpie.
There seem to be plenty of good suggestions for your team's project. Slightly off target might be some suggestions for how they explain their instruments. Notably, why frets or fret marks are where they are...
It's easy to pick up a pre-made scale template for a given scale length, but the kids would learn nothing about how music is created.
Western music and scales are mathematical in nature. In fact, the placement of frets is based on calculation of the 12th root of 2. For example, for an instrument with a scale length of 24 inches, the first fret (from the nut) would be placed at the 12th root of 24 or 1.347" (34.21mm). Subtract that amount from the scale length to determine the "new" scale length and again do the calculation to determine fret location (24-1.347 = 22.653). 12th root equals 1.271 for 2nd fret placement and so on. This can all be set up on an Excel spreadsheet in just a few minutes.
If that doesn't impress the judges nothing will. Plus it's a great lesson for future builds of any scale length.
Good luck with your project.
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray May 7. 11 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans May 5. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!