Hello again,
I'm working on my "prototype" wine box, which is actually quite big. When I chose a 23'' saddle length, it look likes the bridge is too far from the end/bottom of the box (not a big issue but it's less sexy)
I've also issues with my strings which nearly too short (my headstock is also a bit long, already cropped it otherwise I couldn't attach the strings).
I'm also wondering about the angle between the end of the box and the bridge which will maybe be too small.
Moving the string anchors next to the bridge could help with the string lengths, but not with the guitar ergonomics, and I'm not sure about the resistance of the lid for the traction of the strings.
Maybe it's just my saddle length which is poorly chosen ?
In summary:
1/ Can you give me advice on how I can improve my current setup without changing everything ?
2/ Do you know what I can do in my next build when using that kind of big wine box ?
Thank you so much in advance,
Ben
Tags:
Bring your fingerboard closer to the bridge by overlapping the last four five frets over the body. Then move the bridge back. Use either a pinned bridge or longer tailpiece.
Taff
Ahah nice, didn't think on simply add a new fretboard over the existing one, really good idea !
Maybe I'll even find something nicer thank plywood, I'll try something based on your ideas which... gave me ideas
here's a 3-bottle wine box 6-string guitar i made as you can see the neck extend's into the box 7 fret's, it's a 24 1/2" scale length, this allow's the bridge to be placed well toward's the end of the box,
the second picture show's the height the neck need's to be in relation to the top of the box, hope this help's you a bit,
Your projects are really nice ! Thanks, each time I get an answer or see a example it clarify a bit more the puzzle :-)
Cut a 5 degree angle on the part of the neck inside the box (on the upper part). This will angle the neck back and give you more bridge height/break angle. You can move the neck further into the box. Maybe cut out the lid to give you upper frets? Or lose a few frets?
You can just see the angle on this neck (look closely at the glue line between the two wood pieces).
Hi, Ben, That's good, glad to help.
Taff
Hi again, yes would be good to not use plywood for a fingerboard, I would think that the wood quality of the inner plies would not grip the fret tang well enough, unless glue is used also, in the slot.
Taff
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray May 7. 11 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans May 5. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!