3 String P90's Anyone ?

[Ken Wachholz]

So I turned my wife's old Singer into a coil winder and made a few three pole single coils with a 1-1/8 string spacing. Sound pretty damn good.

Now I'm thinking of making some P90's. Any one ever try cutting/shortening bar magnets ?

Love the sound from CBGitties P90's but the string spacing is too close as with any 6 pole pickup on a three string CBG.

Thoughts?

[Paul Craig]

Deltagrooveguitars.com  They make a 3 pole and 4 pole P90 style pup that sound good. They probably cut their mags down with a cutoff wheel on a dremel, but not sure. They don't cost much so experiments won't set you back much.

[Ken Wachholz]

Bought one of their PU a while back for a 1/2 a 12 string CBG I made and their pretty much just a Strat style single coil. Sound nice though. The ones I've made cost less than $6 each parts wise.

Thought about this some more last night and adding a another hole in the middle of the P90's from Gitty really wouldn't be that hard to do.

[Skeesix]

I made one of these using small magnets per Jason Lollar's pickup winding book.

http://cigarboxguitars.com/resources/workshops/pickup-workshop

Stew Mac posted a how-to and used one of their bar magnets cut in half. They said you can use a Dremel cut off wheel or hacksaw. I think I might go with a hacksaw and try to keep it cool. You can always remagnetize with a neo magnet if you need to.

http://www.stewmac.com/How-To/Trade_Secrets/Build_your_own_custom_p...